Hartco Clip Tools - LockNail™ Machines
Clinch Clip Tools - Spring Clip Tools - Clipping Machines - LockNail™ Machine |
||||||
Clinch Clips - Spring Anchor Clips - LockNails™ |
||||||
HR-VRC-BONNELL |
||||||
VRC - 9,375 to 15,625 Clips Magazine 2,000 Lbs.(2,500 Lbs. Crated) VRC Machine |
||||||
Call for Pricing
|
Borderwire sides to innersprings
The process of clipping an innerspring is as follows: An innerspring is taken off the transfer/coiler by an operator and placed on the Rotating Work table. The operator retrieves two border wires and positions them on the innerspring. They are attached to the perimeter corner coils using Clip Tool. The unit is now pre-clipped and is taken off the table and placed on the VRC Machine. The operator presses the start button and the machine runs automatically to finish attaching the border wires. While the machine clips the border wires the operator pre-clips another unit. The NEW faster VRC will finish clipping at the same time the operator finishes the second pre-clipping operation. The next pre-clipped unit is placed on the right side of the machine, the machine is started and the first finished unit is unloaded.
|
|||||
|
|
|||||
Clinch Clip - Spring Clip Tools Machines |
||||||
Item Number |
Applications - Features - Benefits |
Fasteners Used |
||||
|
CL, CLP(13, 15) |
|||||
|
CL, CLP(13, 15) |
|||||
MOD. 46 Clinching Tool | ||||||
Bedding |
CCP-33, 32 |
|||||
Bedding |
CCP-13, 19, 26 |
|||||
|
CL, CLP(61) |
|||||
MODEL 65AT CLINCHING TOOL | ||||||
MODEL 65BAT LTWT CLINCHING TOOL | ||||||
|
2312, 23, 2412, 24, 29 |
|||||
CLINCHING TOOL LTWT MODEL 55B | ||||||
|
CL, CLP 312, 3, 4 |
|||||
HR-68C-100 |
|
CL, CLP-20 |
||||
|
CL, CLP-34 |
|||||
|
CL, CLP-312, 3, 4, 34 |
|||||
|
CL, CLP-36 |
|||||
HR-86C-110 |
|
CL,-34AL, 36AL, 34NAL, 36NAL |
||||
HR-86C-170 |
|
CL-34NAL, 36NAL |
||||
HR-85SB10 |
|
CL, CLP(36-10) |
||||
MODEL 85 CLIPPING TOOL | ||||||
MODEL 85A LW CLIPPING TOOL | ||||||
MODEL 85S CLINCHING TOOL | ||||||
MODEL 85S LW CLINCHING TOOL | ||||||
MODEL 85SBL CLINCHING TOOL | ||||||
MOD 85SBLT LTWT CLINCHING | ||||||
MOD 85SBLTN CLINCHING TOOL | ||||||
|
CL, CLP(38) |
|||||
|
Securing upholstery panels to the frame. The LockNail™ system is a competitively priced upholstery panel nailing system allowing quick and easy applications of a hard galvanized steel fastener to cardboard or composite board upholstery panel. The system improves quality with accurate placement of nails and reduces panel failure by eliminating nail pop-thru in upholstery material. As the locknail is driven through the panel by a pneumatic “Stapler” three barbs pierce the material. The two smaller tabs are clinched like a staple securing the low profile head to the panel. The third larger tab is a strong thin ribbed nail available in 3/4" and 15/16" lengths. After this 'pre-nailing' padding and cover material are applied to the panel during the finishing operation. The panel can then be securely nailed to the furniture frame using a mallet or block of wood. |
HR-LN-2, HR-LN-3
|
||||
|
|
|||||
T40S5CLP Spring Anchor Clip Stapler
|
|