Pneumatic Finish Staplers - Narrow Crown Finish Staplers

7/32 Inch Crown SX Series - 1/4 Inch Crown 90 Series - 5/16" Crown SL Series

Click model to view your price

• SX150-1 Contact Trip
• SX150-2 Sequential Trip
• SX150-3 Trigger Operated
• SX150K-1 - Industrial Jam-Free Finish Stapler Kit Includes carrying case & fasteners

• Weight: 2.5 lbs, 1.13 kilos
• Driving Power: 170
• Fastener Gauge: 18
• Fastener Range: 1/2 to 1-1/2
• Fastener Size Maximum: 1-1/2
• Fastener Size Minimum: 1/2
• Magazine Capacity: 135

Uses: 7/32" Crown Finish Wire

(.050" x .035")

3/8" - 1 1/2" Staple

• Lightweight magnesium housing for jobsite durability
• Oil free operation prevents stains on workpiece
• Ultra quiet rear exhaust
• Open nose design for easy jam clearing
• Adjustable depth control for quick countersinking adjustments
• Compact and lightweight for easy maneuverability
• Over molded comfort grip
• Narrow nose for accurate fastener placement into hard-to-reach areas

Click model to view your price

• SX150LM-1 Contact Trip
• SX150LM-2 Sequential Trip
• SX150LM-3 Trigger Operated

• Weight: 3.5 lbs, 1.59 kilos
• Driving Power: 170
• Fastener Range: 1/2" - 1 1/2"
• Staple Capacity: 250
• Height: 9-1/2",241.3mm
• Length: 14-1/8",358.78mm
• Width: 2-5/16",58.74mm
• Operate Pressure: 70 - 120 psi
• Thread Fitting Type: NPT
• Thread Size: 1/4"

Uses: 7/32" Crown Finish Wire

(.050" x .035")

3/8" - 1 1/2" Staple

• Lightweight magnesium housing for job site durability
• Compact and lightweight for easy maneuverability
• Molded rubber comfort grip designed to last longer
• Ultra Quiet rear exhaust
• Narrow nose for accurate fastener placement into hard-to-reach areas

SL150 - 5/16 Inch Crown Pneumatic Finish Stapler

Click model to view your price

• SL150-1 Contact Trip

• SL150-2 Sequential Trip

• SL150-3 Trigger Operated

• Weight: 2.5 lbs, 1.13 kilos
• Driving Power: 170
• Fastener Gauge: 18
• Fastener Range: 3/8 to 1-1/2
• Fastener Size Maximum: 1-1/2
• Fastener Size Minimum: 3/8
• Magazine Capacity: 185

Uses: 5/16" Crown Finish Wire

(.050" x .035")

 3/8" - 1 3/8" Staple

• Open drive channel for easy jam clear
• Lightweight magnesium housing for job site durability
• Compact and lightweight for easy maneuverability
• Molded rubber comfort grip designed to last longer
• Ultra Quiet rear exhaust
• Narrow nose for accurate fastener placement into hard-to-reach areas

SL150LM - 5/16 Inch Crown Industrial Long Magazine Pneumatic Stapler

Click model to view your price

• SL150LM-1 Contact Trip
• SL150LM-2 Sequential Trip
• SL150LM-3 Trigger Operated

• Weight: 3.5 lbs, 1.59 kilos
• Height: 9-1/2",241.3mm
• Length: 14-1/8",358.78mm
• Width: 2-5/16",58.74mm
• Driving Power: 170
• Fastener Range: 1/2" - 1 1/2"
• Operate Pressure: 70 - 120 psi
• Staple Capacity: 250
• Thread Fitting Type: NPT
• Thread Size: 1/4"

Uses: 5/16" Crown Finish Wire

(.050" x .035")

 3/8" - 1 3/8" Staple

• Lightweight magnesium housing for job site durability
• Compact and lightweight for easy maneuverability
• Molded rubber comfort grip designed to last longer
• Ultra Quiet rear exhaust
• Narrow nose for accurate fastener placement into hard-to-reach areas

JB521B - 5/16 Inch Crown Outward Clinch Pneumatic Stapler

Click model to view your price

• JB521B Trigger Operated

• Weight: 2.8 lbs, 1.27 kilos
• Driving Power: 160
• Leg Length: 1
• Magazine Capacity: 100

Uses: 5/16" Crown Finish Wire

(.050" x .035") 1" Staple

• Designed for staple legs to flare outward giving good holding power in soft material
• Adjustable flare from straight staple to moderate flare for good holding in thick, soft material to severe flare for shallow materials where staple cannot show on other side.

SX150-BHF2  7/32" Crown Laminated Tongue and Groove Flooring Air Stapler

Click model to view your price

• SX150BHF-2 Sequential Trip

• Weight: 3.2 lbs, 1.45 kilos
• Height: 9",244.6mm
• Length: 10",257.3mm
• Width: 3",76.2mm
• Sequential trip

Uses: 7/32" Crown Finish Wire

(.050" x .035")

3/8" - 1 1/2" Staple

• Shipped from the factory set for BRUCE "Natural Reflections" flooring
• Precisely drives staples at proper angle and depth
• Magnesium housing for extreme durability
• Oil Free operation
• Compact and lightweight for easy maneuverability
• Molded rubber comfort grip designed to last longer
• Ultra quiet rear exhaust
• Ultra quiet rear exhaust

BAT611 - 1/4 Inch Crown 90 Series Pneumatic Stapler

Click model to view your price

• BA-T611 Trigger Operated

• BA-T711 Trigger Operated

• Weight: 2.8 lbs
• Tool Height: 7-13/16"
• Tool Length: 9-3/4
• Fastener Range: 1/2 to 1-1/4
• Fastener Size Maximum: 1-1/4
• Fastener Size Minimum: 1/2
• Magazine Capacity: 125

Uses: 1/4" Crown Finish Wire

(.050" x .041")

1/2" - 1 1/4" Staple

BAT611LM- 1/4 Inch Crown 90 Series Pneumatic Long Magazine Air Stapler

Click model to view your price

• BA-T611LM Trigger Operated

• Weight: 4.08 lbs
• Tool Height: 7-13/16"
• Tool Length: 14-5/16
• Fastener Range: 1/2 to 1-1/4
• Fastener Size Maximum: 1-1/4
• Fastener Size Minimum: 1/2
• Magazine Capacity: 215

Uses: 1/4" Crown Finish Wire

(.050" x .041")

1/2" - 1 1/4" Staple

Pneumatic Finish Staples - Narrow Crown Finish Staples

7/32 Inch Crown SX Series - 1/4 Inch Crown 90 Series - 5/16" Crown SL Series

• Fastening flange to foam encased innerspring; fabric to cardboard, foam; temporary pinning of fabric
• Cabinets, trim work, drawers, cleat attachment, pin tenon joints, drawer stop blocks, lattice
• Installation of Bruce® “Natural Reflections" and 9/16" thick laminated tongue and groove flooring

1 Case Minimum

Click Item for Your Price Per Case

Staple Description

7/32 Inch Crown Industrial Pneumatic Finish Staples

Click Item for Your Price Per Case

Staple Description

Call for Your Price Per Case

Staple Description