Home | Safety Information | Contact Us | Call For Your Price

 

Air Nailers | Air Nails | Staplers | Staples | Hog Ring Tools | Hog Rings | Hartco  Tools  | Clips | Bostitch Parts Kits
   

21 Degree Plastic Collated Pneumatic Metal Connector Nails

 Pneumatic nails - air nails - metal connector nails and stick nails for construction, industrial, packaging and shipping applications.

Click Item for your Price Length (Inches) Points Finish Shank Type Stick Nails Below Fit Bostitch Nailers Listed: Quantity Per Case Weight Per Case Boxes Per Pallet
RH-MC13115-S 1-1/2" Diamond Heat Treat .131 Smooth F21PL, N88RH-2MCN, N88RH 1000 6.6 200
RH-MC13115GAL-S 1-1/2" Diamond Heat Treat Mech.Galv. .131 Smooth F21PL, N88RH-2MCN, N88RH 1000 6.6 200
RH-MC14815-S 1-1/2" Diamond Heat Treat .148 Smooth F21PL, N88RH-2MCN, N88RH 1000 7.18 200
RH-MC14815GAL-S 1-1/2" Diamond Heat Treat Mech.Galv. .148 Smooth F21PL, N88RH-2MCN, N88RH 1000 7.18 200
RH-MC13125-S 2-1/2" Diamond Heat Treat .131 Smooth F21PL, N88RH-2MCN, N88RH 1100 10.77 140
RH-MC13125GAL-S 2-1/2" Diamond Heat Treat Mech.Galv. .131 Smooth F21PL, N88RH-2MCN, N88RH 1100 10.77 140
RH-MC14825-S 2-1/2" Diamond Heat Treat .148 Smooth F21PL, N88RH-2MCN, N88RH 900 11.55 140
RH-MC14825GAL-S 2-1/2" Diamond Heat Treat Mech.Galv. .148 Smooth F21PL, N88RH-2MCN, N88RH 900 11.55 140
RH-MC16225-S 2-1/2" Diamond Heat Treat .162 Smooth F21PL, N88RH-2MCN, N88RH 900 13.56 140
RH-MC16225GAL-S 2-1/2" Diamond Heat Treat Mech.Galv. .162 Smooth F21PL, N88RH-2MCN, N88RH 900 13.56 140

Buy 21 Degree Plastic Collated Pneumatic Metal Connector Nails online now.

  

Buy 21 Degree Plastic Collated Pneumatic Metal Connector Nails online now.
 
Information Regarding Corrosion - For many years, the industry standard wood preservative has been CCA (Chromated Copper Arsenate). Effective January 1st, 2004, the pressure treated wood industry voluntarily agreed to remove arsenic from the wood treating process. Internal and independent testing has proven that the “new” pressure treated wood formulations (Alkaline Copper Quaternary - ACQ, Copper Azole, etc.) are more corrosive to fasteners

Bostitch recognizes the need to offer fastener solutions to address code official requirements, wood manufacturers recommendations, and most of all, construction professionals concerns. For the most extreme corrosive environments, stainless steel fasteners are the best recommendation. Bostitch currently offers grade 304 stainless steel fasteners in all types of collation. For fasteners used with the new pressure treated wood in less corrosive environments, Bostitch has you covered.

For our full line of wire-welded stick and coil nails, Bostitch introduces THICKCOAT™ galvanization. This new technology in galvanization was designed specifically to protect against today’s more corrosive pressure treated lumber. This new coating technology uses an enhanced electro-galvanization process to apply more than 2½ times the amount of zinc than conventional electro-plating. Coupled with this dense zinc coating is a rust-resistant chromate overcoat. AWPA E-12 laboratory testing has shown that THICKCOAT™ galvanized fasteners corrode at approximately half the rate of our leading competitors.

For plastic collated round head strip nails, Bostitch offers a full line of Hot Dipped Galvanized nails. Our Hot Dipped Galvanized nails meet or exceed ASTM A153 zinc weight specification. This ensures a thick zinc coating to provide superior corrosion resistance.

Bostitch continues to conduct the most extensive corrosion testing of fasteners in the industry. Our testing is conducted in accordance with the ASTM B117 or AWPA E-12 specifications. This testing is what gives us the confidence to recommend our stainless steel, Thickcoat™ galvanized and hot dipped galvanized fasteners for use in the new pressure treated wood. 
 

 

 
  Case Quantities, Box Quantities, Roll Quantities, Descriptions, Weights & Pricing are subject to change without notice.  It is our policy to make every effort to notify customers of such changes prior to shipping.  Our pricing is from time of shipment.  Any returns must be received at our warehouse within three weeks after ocfastening.com™ has shipped your order from our warehouse.  To return product, you must contact us to receive a Return of Goods Authorization Number.  All returns are subject to a 25% restocking charge.  Custom orders are non-returnable.  Problems regarding this web site should be directed to: macattacknails@mac.com.  Copyright © 2016 ocfastening.com™. All rights reserved.