Home | Safety Information | Contact Us | Call For Your Price

 

Air Nailers | Air Nails | Staplers | Staples | Hog Ring Tools | Hog Rings | Hartco  Tools  | Clips | Bostitch Parts Kits
   

 

 

 

 

Coil Roofing Nailers - Coil Roofing Nails

 

Coil Roofing Nails Below Fit the Following Air Nailers:  

Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10

 

 

 

Call to order - (800) 841-8569

Applications Include: Composition Roofing, Vapor Barrier Installation, Insulation Board (Adapter Available) - DC6, Vinyl Siding (Adapter Available) - VSA2, Fiber Cement Siding

  • RN46B-1 Contact Trip
  • RN46B-2 Sequential Trip

RN46B Specifications:

  • Driving Power:410 inch lbs
  • Fastener Range:3/4" to 1-3/4"
  • Magazine Capacity:120
  • Operating Pressure:70-120 psi
  • Power to Weight Ratio:83.6
  • Thread Fitting Type:NPT
  • Thread Size:1/4"
  • Tool Height:10-5/8",269.88mm
  • Tool Length:10-1/2",266.7mm
  • Tool Width:4-5/8",117.48mm
  • Tool Weight:4.8 lbs, 2.18 kilos

 

Features & Benefits:
  • Lightweight magnesium housing for jobsite durability
  • Weighs only 4.8 lbs
  • Dry-fire lockout; does not fire when empty
  • Carbide inserts in tip for long life
  • Over molded grip for comfortable use
  • Quick-set adjustable depth control for consistent nail drives
  • Aggressive wear guards and skid resistant pads
  • 410 inch pounds of driving energy for the hardest of applications
  • Patented single action side load canister
  • Shingle guide with push button adjustments - no tools needed
  • Full round driver for more consistent drive quality

Uses CR Series 15° Wire Collated Coil Roofing Nail .120 Shank. Available in: Galvanized, Stainless Steel

 

 

 

Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings.  Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important.  Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger.  See Safety Information for Trip Operation!

 

 

 

Coil Roofing Nailers - Coil Roofing Nails

Coil Roofing Nails Below Fit the Following Air Nailers:  

Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10

 

 

 

Call to order - (800) 841-8569

Air Tools - Air Nailers - Coil Roofing Nailers for Roofing  Materials

 
Item NumberPneumatic Coil Roofing Nailers &  Tool Accessories DescriptionMagazine CapacityWeight/ Tool 
RN46B-1Roofing Nailer Contact Trip, 3/4" - 1 3/4"

120

6.0 
RN46B-2Roofing Nailer Sequential, 3/4" - 1 3/4"1206.0 
VSA2Vinal Siding Adapter for RN46BN/A0.15 

Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings.  Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important.  Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger.  See Safety Information for Trip Operation!

 

 

Call to order - (800) 841-8569

Coil Roofing Nails for Roofing - Fit 15 Degree Roofing Air Nailers

 
Item NumberLength

Points

FinishShank TypeCoil Drywall Nails Fit:Qty / BoxWeight / Box (lbs)Boxes / Pallet 
CR19GAL
3/4
DiamondGalvanizedSmoothN12,RN45B, RN46B720020.6564 
CR2DCGAL
7/8
DiamondGalvanizedSmoothN12,RN45B, RN46B720026.9056 
CR2DCSS
7/8
DiamondStainless SmoothN12,RN45B, RN46B720026.9056 
CR2DGAL
1
DiamondGalvanizedSmoothN12,RN45B, RN46B720026.9056 
CR3DGAL
1-1/4
DiamondGalvanizedSmoothN12,RN45B, RN46B720034.6048 
CR3DSS
1-1/4
DiamondStainless SmoothN12,RN45B, RN46B720034.6048 
CR4DGAL
1-1/2
DiamondGalvanizedSmoothN12,RN45B, RN46B720038.6540 
CR4DSS
1-1/2
DiamondStainless SmoothN12,RN45B, RN46B720038.6540 
CR5DGAL
1-3/4
DiamondGalvanizedSmoothN12,RN45B, RN46B720044.9032 

 

Coil Roofing Nails Above Fit the Following Nailers: Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10

 

 

 

 

Information Regarding Corrosion - Zinc coatings on nails and staples can help with corrosion.  However, high humidity, salt air, acidic wood, industrial gases, installation impact, preservatives and fire retardants containing salts, can break down the Zinc coating and cause fasteners to rust.  Harsh conditions may call for special material coating or special fasteners such as aluminum or stainless steel.  Wood manufacturers may call for special or high grade galvanized fasteners which if not used void their product warrantees.  Always check the wood manufacturers' specifications beforehand to insure full compliance with their requirements.

 

 

 

 
  Case Quantities, Box Quantities, Roll Quantities, Descriptions, Weights & Pricing are subject to change without notice.  It is our policy to make every effort to notify customers of such changes prior to shipping.  Our pricing is from time of shipment.  Any returns must be received at our warehouse within three weeks after ocfastening.com™ has shipped your order from our warehouse.  To return product, you must contact us to receive a Return of Goods Authorization Number.  All returns are subject to a 25% restocking charge.  Custom orders are non-returnable.  Problems regarding this web site should be directed to: macattacknails@mac.com.  Copyright © 2021 ocfastening.com™. All rights reserved.